After completing step 3 of the audio setup wizard to configure your audio inputs as JamKazam session tracks, the next thing to do in this step 4 is to decide if you need to set up a chat mic for sessions, and if so to configure your settings for a chat mic. You should now be viewing the step 4 screen of the audio setup wizard in the JamKazam app (pictured below).
Before doing anything, let's talk about voice chat. When you are in JamKazam sessions with other musicians, you won't just be playing music. You'll also spend a fair amount of time talking with each other - sometimes about the music you're playing, and sometimes about just about anything - just like you would in person. So you must have a way to talk with other musicians in sessions, and this means you must have a microphone set up for JamKazam to capture your voice when speaking. You have three main options to set up and use a microphone for talking with others in sessions, as follows.
- If you already set up a microphone as an audio input track in step 3 of this wizard, then you may be able to just use that microphone to also talk with others in your sessions. For example, if you set up a mic to sing in sessions, you can obviously also just talk through that mic. If you set up a mic to capture instrumental audio, then you may or may not be able to talk through that mic. For example, if you set up the mic for a violin or a trumpet, then the mic is going to be on a mic stand up in the area of your face, and you can pretty easily talk through that mic. If you set up a mic for your acoustic guitar, then the mic is likely positioned lower, and you may need to bend down and forward to talk through the mic. If you set up a mic on your guitar amp or a drum kit, then the mic is not pointed toward your face and probably also set to an input level that won't pick up your voice. If you have already set up a mic in step 3 of this wizard and can use that mic to talk with others in your sessions, then you don't need to do anything at all in this step 4 of the wizard. Just click the orange Next button in the lower right corner of the wizard to move ahead to step 5. Otherwise, read on for more options.
- If you can't use a microphone you've already set up for talking in sessions, then you can set up another mic on your audio interface and use that mic for talking. If you already have a mic and XLR cable handy and there is an unused audio input port available on your audio interface, you can click the gray Back button in the lower right corner of the setup wizard and go back to step 3 of the wizard to add an audio track for this microphone. Or you can buy
To set up a chat mic on your Mac, first click the radio button labeled "Use Chat Microphone" (pictured below with arrow). This enables a list of microphone options from which you can choose. If your Mac comes with a built-in microphone (most but not all do), then the built-in mic is usually labeled in this list of options as "Built-in Microph" by the Mac system. The Mac system also gives options of "Left" and "Right" inputs, which frankly is meaningless. After you have clicked/selected the "Use Chat Microphone" radio button, you should next click/select the radio button in the Voice Chat Input list that is labeled "Built-in Microph - Left" (pictured below with arrow). This selects and activates the built-in microphone for chat mic use during JamKazam sessions. You can verify that the built-in mic is active by talking or generally making noise, and watch the lights on the Gain meter to the right of the Voice Chat Input list bounce up and down.
You are now ready to move forward to step 5 - the last step in the audio setup wizard. To do this, click the orange Next button in the lower right corner of the wizard (pictured below with arrow), and click here for instructions to complete step 5.